3CX VoIP Phone PBX System for
Windows - Technical Support
VoIP SIP Phone Configuration: snom 360 SIP Phone
- Ensure that you have
created the extension that you wish to use with the phone in 3CX Phone System first.
Take note of the ID field and the password that you have entered for the extension.
- Connect the Snom-360 phone to the network and mains power supply. The phone will
boot up, and providing you have DHCP installed on your network, will obtain an IP
and display it at the bottom of the phone’s LCD screen.
- Now point your browser to the web interface of the phone: ‘http://<phone-ip-address>’
where is the IP address shown on the phone.
- Enter the password of the phone and click login to access the phone’s configuration.
For this particular phone, the default password to reach administrator mode is “0000”
figure 1 snom 360
- Click on ‘Identity 1’ on the left pane under Setup category so you can configure
the phone. (Refer to figure 1)
- First make sure that ‘Identity active’ under Identity 1 is set to On.
- In the “Display Name” field enter the name you want to be displayed on the Phone
display.
- Now proceed by entering in the “Account” field which is the extension you want to
associate with this phone. This should match the “Extension number” field in the
User Information section of the ‘Add Extension’ page in the 3CX Management Console
- Enter a password for the account in the “Password” field. This should match the
“Password” field in the Authentication section of the ‘Add Extension’ page in the
3CX Management Console
- In the Registrar field, enter the IP or server name of the 3CX Phone System server
- Repeat the same setting for the Outbound Proxy option
- In the “Authentication Username” field enter the authentication ID. This should
match the “ID” field in the Authentication section of the ‘Add Extension’ page in
the 3CX Management Console
- Now press “save” to save all changes which is on the bottom of your configuration
screen. Your phone will register with the 3CX phone system. You can verify that
on the Phone System\Line Status page of the 3CX management console.
- If you want to configure additional lines, please repeat steps 5 to13 providing
that you have additional extensions created on the 3CX server. .